Kill app doesn't work

[Papy_Rafale]

Hello,
I've make a new macro, with a special action who say, if device (Bluetooth) disconnect, kill App (Medi center DACIA), but App don't kill.
What the matter ?

 

[Jacob L]

It will never fire unless two triggers happen. Change else if to just if

 

[Papy_Rafale]

I tested this and It's work, but now I'have a new problem, my Bluetooth stops after a few minutes.

I tested with a simple macro (Like the first image, "MCD-ON / OFF2") to verify that everything is working fine without the Bluetooth disconnecting by itself after a few minutes. (It's ok)

Now what I would like to add to this simple macro is to do the same in reverse.

So the first part is the one that works, the trigger is the opening of my application, for the second part the trigger must be the change of state of Bluetooth, (automatic disconnection from the device).

1- launch of "Dacia Media Center (trigger)
2- launch of Bluetooth
3- Bluetooth connection on my device (my car).

Then when I switch off the ignition of my car.

1- the trigger deflects the disconnection of the bluetooth device, which is done automatically when I switch off the ignition.
2- the first action must be to stop my phone's bluetooth.
3- the second action must be to stop the "Dacia Media Center" application.

Can you help me?

 

[Papy_Rafale]

I'd just test a new macro.
But it's always down.

 

[Qarboz]

try to move the bluetooth deactivation action to the bottom, and before this enter a wait of 2 seconds

 

[Papy_Rafale]

I've do that, but I'll try it tomorrow morning with Bluetooth of my car, it's to late for this evening.

Thanks for your help